Service 02
Jewellery repair and restoration
The ring in the drawer that no longer fits, the chain with the weak link, the brooch missing a stone. Work that takes a jeweller an afternoon gives a piece back decades.

Most jewellery is not broken. It is waiting.
Repair, or restoration
Repair puts a piece back into use: a ring to the right size, a clasp that holds, a claw that grips the stone it was made to grip. It is practical work, and most of what comes to the bench is exactly this.
Restoration is the slower question. An older piece carries evidence of its own life — thinning on a shank, softened engraving, a patina that took eighty years. Some of that can be put right and some of it should be left alone, because removing it removes the piece's age with it. We will tell you which is which, and the decision stays yours.
Sentimental pieces are the ones we take most carefully. Where a stone cannot be matched or a setting cannot be saved without changing the character of a piece, we would rather show you the options than make the choice for you.
- Metals
- Gold, white gold, platinum and silver
- Stones
- Reset, re-tipped or matched where possible
- Estimate
- In writing, before any work begins
- Antique pieces
- Assessed for what should be left alone

What is involved
Work we take on
If what you need is not listed, ask — most of this bench is a conversation first.
Ring resizing
Up or down, in gold, white gold or platinum. Rings with stones set all the way round, or with engraving across the shank, are assessed separately because they cannot always be sized safely.
Claws and settings
Worn claws re-tipped or rebuilt, loose stones reset, and settings checked across the whole piece — a loose stone is usually a warning about the ones either side of it.
Chain and clasp repairs
Broken links rejoined, weak sections replaced, and clasps repaired or changed for something easier to use with one hand.
Pearl and bead restringing
Restrung on silk with knots between the pearls, so a broken thread loses one pearl rather than the whole strand, and the clasp checked while it is off.
Stone replacement
A missing stone matched for cut, colour and size as closely as it can be. Where an exact match is not possible, you see the nearest options before anything is set.
Cleaning and refinishing
Professional cleaning, polishing and rhodium plating for white gold — and honest advice about where a piece is better left with its own patina.
Step by step
How it works
The same order every time, with the decision in your hands at the point it matters.
Describe the piece
Tell us what it is, what has happened to it, and what you would like it to do again. Photographs in daylight, including a close one of the damage, tell us most of what we need.
Assessment at the bench
The piece is examined under magnification: metal, settings, stones and the places that are about to go next, not only the place that has already gone.
Written estimate and options
You receive what we recommend, what we recommend against, and what each would cost. Where there is a choice between restoring and leaving well alone, both are set out.
Work and return
The agreed work is carried out, the piece is cleaned, and it is photographed and returned to you properly packed and tracked.
The case for it
Why bring a piece here
- Nothing irreversible without asking
- Polishing away an inscription or replacing an original setting cannot be undone. Anything that changes a piece permanently is discussed with you first.
- The whole piece is checked
- A repair that ignores the three claws about to fail is not a repair. Everything comes back with the rest of it looked at.
- Sentiment taken seriously
- A piece that belonged to someone is handled as a piece that belonged to someone. If that means doing less, we will tell you so.
- Plain pricing
- One written estimate, agreed before work starts. If something unexpected appears at the bench, you hear about it before it is acted on.
Practical
Worth knowing
- Rings that cannot be sized
- Full eternity rings, rings with channel-set stones around the whole band, and some engraved or inlaid shanks cannot be resized without rebuilding them. We will say so rather than attempt it.
- Matching old stones
- Older cuts are not made in the same way today. A close match is usually possible; an invisible one sometimes is not, and you will see what we have found before it is set.
- Patina and polish
- A high polish on a Victorian piece can take sixty years off its face in the wrong way. We will advise on where to stop, and stop there.
Often next
Related services
- Service 03
Bespoke commissions
A new piece made to your design, or an inherited one remodelled into something you will actually wear.
- Service 01
Watch servicing & repair
Full services, battery and seal changes, crystal and bracelet work, and timing adjustment for mechanical and quartz watches.
- Service 04
Valuations
Written valuations for insurance, probate and private sale, with each piece described, measured and photographed.

Send us a photograph of the piece
A daylight picture and a line about what has happened is enough to start. We will tell you what can be done, what we would leave alone, and what it would cost.